Defining Lag Settings - Cisco SGE2000 - - Gigabit Switch Administration Manual

Aggregating Ports

Defining LAG Settings

STEP 4
Defining LAG Settings
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Click Apply. The LAG membership is defined, and the device is updated.
Link Aggregated Groups optimize port usage by linking a group of ports together
to form a single aggregated group. Link aggregated groups multiply the
bandwidth between the devices, increase port flexibility, and provide link
redundancy.
LAG Settings Page
The
LAGs. The device supports up to eight ports per LAG, and eight LAGs per system.
LAG Settings Page
The
Layer 3 mode (definable on the device through the CLI interface).
Layer 2 devices support Private VLAN Edge, which can be enabled for specific
Edit LAG Settings Page
LAGs on the
Click Bridging > Port Management > LAG Settings. The
LAG Settings Page
The LAG Settings Page
contains fields for configuring parameters for configured
varies, depending on whether the device is in Layer 2 or
.
contains the following fields:
18
LAG Settings Page opens:
396