Cisco SGE2000 - - Gigabit Switch Administration Manual page 188

Configuring VLANs
Defining VLAN Interface Settings
STEP 3
STEP 4
Cisco Small Business SFE/SGE Managed Switches Administration Guide
-
Customer
— The port can be member of one or more double tagged
Multicast TV VLAN. Refer to "Define Customer VLAN using Q-in-Q" for
details.
•
PVID — Assigns a VLAN ID to untagged packets. The possible values for
General, Access, and Trunk Interface VLAN Mode are:
-
SGE devices
-
SFE devices
Packets classified to the Discard VLAN are dropped.
•
Frame Type — Packet type accepted on the port. Possible values are:
-
Admit All
— Indicates that both tagged and untagged packets are
accepted on the port.
-
Admit Tag Only
the port.
•
Ingress Filtering — Ingress filtering discards packets which do not include an
ingress port. The possible values are:
-
Enable
— Ingress filtering is activated on the port.
-
Disable
— Ingress filtering is not activated on the port.
•
Multicast TV VLAN — Indicates if a Multicast TV VLAN is enabled on the
device. Multicast TV VLANs enable VLANs to receive Multicast TV
transmissions from ports that are not Access ports. The possible values are:
-
Enable — Multicast TV VLAN is activated on the port.
-
Disable
— Multicast TV VLAN is not activated on the port.
Define the relevant fields.
Click Apply. The VLAN Interface settings are modified, and the device is updated.
— 1-4094 and 4095
— 1-4093 and 4095
— Indicates that only tagged packets are accepted on
6
179