Managing System Files
Firmware Upgrade
Firmware Upgrade
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Firmware files are downloaded as required for upgrading the firmware version or
for backing up the system configuration. File names cannot contain slashes (\ or /),
the leading letter of the file name should not be a period (.), and the maximum
length for file names on the TFTP server is 127 characters or 31 characters for
files on the switch. (Valid characters: A-Z, a-z, 0-9, ".", "-", "_"). The
Upgrade Page
contains parameters for downloading system files.
Click Admin > File Management > Firmware Upgrade. The
Page
opens:
Firmware Upgrade Page
Firmware Upgrade Page
The
•
U — Specifies that firmware is downloaded for a firmware upgrade.
•
B — Indicates the file name on TFTP server where the uploaded image is
saved.
•
File Type — Specifies the file type of the downloaded file. The possible field
values are:
-
Software Image
-
Boot Code
contains the following fields:
— Downloads the Image file.
— Downloads the Boot file.
13
Firmware
Firmware Upgrade
330