Defining Acl Binding - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring Device Security
Defining Access Control
STEP 3
STEP 4
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Define the relevant fields,
Click Apply. The IP Based ACL is modified, and the device is updated.

Defining ACL Binding

When an ACL is bound to an interface, all the ACE rules that have been defined are
applied to the selected interface. Whenever an ACL is assigned on a port or a LAG
flows from that ingress interface that do not match the ACL are matched to the
default rule, which is Drop unmatched packets. To bind ACLs to an interface:
Click Security Suite > Access Control > ACL Binding. The
opens:
ACL Binding Page
The ACL Binding Page
•
Copy From Entry Number — Copies the ACL binding configuration from the
specified table entry.
•
To Entry Number(s) — Assigns the copied ACL binding configuration to the
specified table entry.
•
Ports /LAGs — Indicates the interface to which the ACL is bound.
contains the following fields:
4
ACL Binding Page
121