Cisco SGE2000 - - Gigabit Switch Administration Manual page 43

Configuring System Time
Defining System Time
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Click System > System Management > Time > System Time. The
Page
opens:
System Time Page
System Time Page
The
•
Clock Source — Indicates the source used to set the system clock. The
possible field values:
-
Use Local Settings —
the default value.
-
Use SNTP Server —
•
Date — Indicates the system date. The field format is , for example, .
•
Local Time — Indicates the system time. The field format is HH:MM:SS, for
example, 21:15:03.
•
Time Zone Offset — Indicates the difference between
(GMT) and local time. For example, the Time Zone Offset for Paris is GMT +1,
while the local time in New York is GMT –5. There are two types of daylight
settings, either by a specific date in a particular year or a recurring setting
irrespective of the year. For a specific setting in a particular year complete the
Daylight Savings area, and for a recurring setting, complete the
•
Daylight Savings — Enables the Daylight Savings Time (DST) on the device
based on the devices location. The possible field values are:
-
USA —
contains the following fields:
The system time is set on the local device. This is
Sets the system time via an SNTP server.
3
System Time
Greenwich Mean Time
Recurring area.
34