Cisco SGE2000 - - Gigabit Switch Administration Manual page 284

Configuring Quality of Service
Defining General Settings
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Click Quality of Service > General > CoS. The
CoS Page
The CoS Page contains the following fields:
•
QoS Mode — Indicates if QoS is enabled on the device. The possible values
are:
-
Advanced
•
Ports — Indicates that the CoS configuration of the ports on the specified
stacking member are described in the page.
•
LAGs — Indicates that the CoS configuration of the LAGs are described in the
page.
•
Interface — Indicates the interface for which the CoS information is displayed.
•
Default CoS — Displays the default CoS value for incoming packets for which a
VLAN tag is not defined. The possible field values are 0-7. The default CoS is 0.
•
Restore Defaults— Restores the factory CoS default settings to the selected
port.
-
Checked
— Restores the factory QoS default settings to ports after
clicking the Apply button.
-
Unchecked
— Enables Advanced mode QoS on the device.
— Maintains the current QoS settings.
CoS Page
opens:
11
275