Mapping Dscp To Queue - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring Quality of Service
Defining General Settings
STEP 1
STEP 2
STEP 3
Cisco Small Business SFE/SGE Managed Switches Administration Guide

Mapping DSCP to Queue

DSCP to Queue Page
The
To map DCSP to Queues:
Click Quality of Service > General > DSCP to Queue. The
opens:
DSCP to Queue Page
DSCP to Queue Page
The
•
DSCP In — Indicates the Differentiated Services Code Point (DSCP) value in
the incoming packet. The following values are reserved and cannot be
changed: 3, 11, 19, 27, 35, 43, 51, and 59.
•
Queue — Defines the traffic forwarding queue to which the DSCP priority is
mapped.
Define the relevant fields.
Click Apply. The device is updated.
enables mapping DSCP values to specific queues.
contains the following fields:
11
DSCP to Queue Page
279