Cisco SGE2000 - - Gigabit Switch Administration Manual page 368

Managing System Logs
Viewing Remote Logs
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Edit Syslog Server Page
Edit Syslog Server Page
The
settings.
Edit Syslog Server Page
The
•
Server — Specifies the name of the Remote Log Server to which logs can be
sent.
•
UDP Port — Defines the UDP port to which the server logs are sent. The
possible range is 1 to 65535. The default value is 514.
•
Facility — Defines a user-defined application from which system logs are sent
to the remote server. Only one facility can be assigned to a single server. If a
second facility level is assigned, the first facility is overridden. All applications
defined for a device utilize the same facility on a server. The field default is
Local 7. The possible field values are Local 0 - Local 7.
•
Description — Provides a user-defined server description.
•
Severity to Include — Indicates the minimum severity level for logs that are
sent to the server. For example, if Notice is selected, all logs from a Notice
severity and higher are sent to the remote server.
The following are the available log severity levels:
-
Emergency
functioning properly, an emergency log message is saved to the
specified logging location.
-
Alert
— The second highest warning level. An alert log is saved, if there
is a serious device malfunction; for example, all device features are
down.
contains fields for modifying Remote Log Server
contains the following fields:
— The highest warning level. If the device is down or not
16
359