Configuring Ports Settings For Layer 3 Enabled Devices - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring Ports

Configuring Ports Settings for Layer 3 Enabled Devices

STEP 4
STEP 5
Configuring Ports Settings for Layer 3 Enabled Devices
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Define the relevant fields.
Click Apply. The Port Settings are modified, and the device is updated.
To define port settings (Layer 3):
Click Bridging > Port Management > Port Settings. The Port Settings Page opens:
Port Settings Page
Port Settings Page
The
•
Copy From Entry Number — Copies the port configuration from the specified
table entry.
contains the following fields:
5
157