Cisco SGE2000 - - Gigabit Switch Administration Manual page 305

Configuring Quality of Service
Defining Advanced QoS Mode
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Edit QoS Policy Profile Page
Edit QoS Policy Profile Page
The
•
Policy Name — Displays the user-defined policy name.
•
Class Map — Displays the user-defined name of the class map.
•
Action — Defines the action attached to the rule. The possible field value is:
•
—
Set Defines the Trust configuration manually. The possible field values
are:
-
DSCP
— In the New Value box, the possible values are 0-63.
-
CoS — In the New Value box, the possible values are 0-7.
•
Police — Enables Policer functionality.
•
Type — Policer type for the policy. Possible values are:
-
Aggregate
policer selected from the drop-down menu. An aggregate policer is
defined if the policer is shared with multiple classes. Traffic from two
different ports can be configured for policing purposes. An aggregate
policer can be applied to multiple classes in the same policy map, but
cannot be used across different policy maps.
-
Single
— Configures the class to use manually configured information
rates and exceed actions.
•
Aggregate Policer — Specifies the Aggregate Policer Name
contains the following fields.
— Configures the class to use a configured aggregate
11
296