Configuring SNMP
Defining Trap Management
STEP 3
STEP 4
STEP 1
STEP 2
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Define the relevant fields.
Click Apply. The SNMP Notification Recipient settings are defined, and the device
is updated.
Modifying SNMP Notifications
The
Edit SNMP Notification Recipient Page
notification settings. The
areas, Notification Recipient, SNMPv1,2 Notification Recipient, SNMPv3
Notification Recipient and UDP Port Notification Recipient.
Click System > SNMP > Security > Trap Management > Station Management.
Click the Edit button. The
Edit SNMP Notification Recipient Page
Edit SNMP Notification Recipient Page
The
•
Recipients IP— Indicates the IP address to whom the traps are sent.
•
Notification Type — Defines the notification sent. The possible field values are:
-
Trap
— Indicates traps are sent.
allows system administrators to define
Edit SNMP Notification Recipient Page
Edit SNMP Notification Recipient Page
contains the following fields:
12
is divided into four
opens:
325