Cisco SGE2000 - - Gigabit Switch Administration Manual page 97

Configuring Device Security
Defining 802. 1 X
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Click Security Suite > 802. 1 X > Authentication. The
opens:
802.1X Authentication Page
802. 1 X Authentication Page
The
•
Unit Number — Displays the stacking member for which the Multiple Hosts
configuration is displayed.
•
Port — Displays the port number for which the Multiple Hosts configuration is
displayed.
•
Host Authentication— Defines the Host Authentication mode. The possible
field values are:
-
Single
— Only the authorized host can access the port.
-
Multiple Host
enabled port. Only one host must be authorized for all hosts to access
the network. If the host authentication fails, or an EAPOL-logoff message
is received, all attached clients are denied access to the network.
-
Multi Session
access to the port. Filtering is based on the source MAC address.
•
Action on Violation — Defines the action to be applied to packets arriving in
single-host mode, from a host whose MAC address is not the supplicant MAC
address. The possible field values are:
contains the following fields:
— Multiple hosts can be attached to a single 802. 1 x-
— Enables number of specific authorized hosts to get
802. 1 X Authentication Page
4
88