Configuring IP Information
IP Addressing
STEP 2
Cisco Small Business SFE/SGE Managed Switches Administration Guide
•
Type — Displays the type of the neighbor discovery cache information entry.
The possible field values are:
-
Static
— Shows static neighbor discovery cache entries.
-
Dynamic
— Shows dynamic neighbor discovery cache entries.
•
State — Specifies the IPv6 Neighbor status. The possible values are:
-
Incomplete
has not yet responded.
-
Reachable
-
Stale
— Indicates the previously known neighbor is no longer reachable.
No action is taken to verify its reachability, until traffic need to be sent.
-
Delay
— Indicates the previously known neighbor is no longer
reachable. The Interface is in Delay state for a predefined Delay Time
that if no reachability confirmation is received, the state will change to
Probe.
-
Probe
— Indicates the neighbor is no longer known to be reachable, and
unicast Neighbor Solicitation probes are being sent to verify reachability.
Click the Edit button. The
Edit IPv6 Neighbors Page
Edit IPv6 Neighbors Page
The
•
Interface — Displays the neighboring IPv6 VLAN number.
— Indicates Address Resolution is in process. The neighbor
— Indicates the neighbor is known to be reachable.
Edit IPv6 Neighbors Page
contains the following fields:
opens:
7
201