Cisco SGE2000 - - Gigabit Switch Administration Manual page 259

Configuring Spanning Tree
Defining Spanning Tree
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Click Bridging > Spanning Tree > Properties. The
STP Properties Page
The STP Properties Page
Global Settings
The Global Settings area contains device-level parameters.
•
Spanning Tree State — Indicates if STP is enabled on the device. The possible
field values are:
-
Enable
— Enables STP on the device. This is the default value.
-
Disable
— Disables STP on the device.
•
STP Operation Mode — Indicates the STP mode that is enabled on the device.
The possible field values are:
-
Classic STP
value.
-
Rapid STP
-
Multiple STP
contains the following fields:
— Enables Classic STP on the device. This is the default
— Enables Rapid STP on the device.
— Enables Multiple STP on the device.
STP Properties Page
10
opens:
250