Configuring Bandwidth - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring Quality of Service
Defining General Settings
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide

Configuring Bandwidth

Bandwidth Page
The
for specified egress and ingress interfaces.
Rate Limits and Shaping are defined per interface:
•
Rate Limit sets the maximum bandwidth allowed on ingress interfaces.
•
Shaping Rate sets the maximum bandwidth allowed on egress interfaces. On
GE ports, traffic shape for burst traffic (CbS) can also be defined.
Click Quality of Service > General > Bandwidth. The
Bandwidth Page
Bandwidth Page
The
•
Ports of Unit — Indicates that the bandwidth settings of the ports on the
specified stacking member are described in the page.
•
LAG — Indicates that the bandwidth settings of the LAGs are described in the
page.
•
Ingress Rate Limit — Indicates the traffic limit for ingress interfaces. The
possible field values are:
-
Status
— Enables or disables rate limiting for ingress interfaces.
is the default value.
allows network managers to define the bandwidth settings
contains the following fields:
11
Bandwidth Page
opens:
Disable
280