Cisco SGE2000 - - Gigabit Switch Administration Manual page 229

Configuring IP Information
IP Addressing
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
Cisco Small Business SFE/SGE Managed Switches Administration Guide
•
MAC Address — Indicates the station MAC address, which is associated in the
ARP table with the IP address.
•
Status — Indicates the ARP Table entry status. Possible field values are:
-
Dynamic
— Indicates the ARP entry was learned dynamically.
-
Static — Indicates the ARP entry is a static entry.
Add ARP Page
Add. The
Click
Add ARP Page
Add ARP Page
The contains the following fields:
•
Supported IP Format — Indicates the IP address format supported by the host.
The possible field values are:
-
Version 4
— Indicates that the host supports IPv4 addresses only.
•
VLAN — Indicates the ARP-enabled interface.
•
IPv4 Address — Indicates the station IP address, which is associated with the
MAC address filled in below.
•
MAC Address — Indicates the station MAC address, which is associated in the
ARP table with the IP address.
Define the relevant fields.
Click Apply. The ARP Settings are defined, and the device is updated.
Modifying ARP Settings
Click System > System Management > IP Addressing > ARP. The
Click the Edit button. The
opens:
Edit ARP Page
opens:
7
ARP Page
opens:
220