Cisco SGE2000 - - Gigabit Switch Administration Manual page 256

Configuring Multicast Forwarding
Defining Unregistered Multicast Settings
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Unregistered Multicast Page
The
belong to Unregistered Multicast groups. Unregistered Multicast groups are the
groups that are not known to the device. All Unregistered Multicast frames are still
forwarded to all ports on the VLAN. After a port has been set to Forwarding/
Filtering, then this port's configuration is valid for any VLAN it is a member of (or
will be a member of).
To define unregistered Multicast settings:
Click Bridging > Multicast > Unregistered Multicast. The
Page
opens:
Unregistered Multicast Page
Unregistered Multicast Page
The
•
Ports — Indicates the port for which the unregistered Multicast parameters are
displayed.
•
EtherChannels — Specifies the EtherChannel for which the Unregistered
Multicast settings are displayed.
•
Interface — Displays the interface ID.
•
Unregistered Multicast — Indicates the forwarding status of the selected
interface. The possible values are:
-
Forwarding
the selected VLAN interface. This is the default setting.
contains fields to handle Multicast frames that
contains the following fields:
— Enables forwarding of Unregistered Multicast frames to
9
Unregistered Multicast
247