Defining Ip Based Acl - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring Device Security
Defining Access Control
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide

Defining IP Based ACL

IP Based ACL Page
The
including defining the ACEs defined for IP Based ACLs.
To define an IP based ACL:
Click Security Suite >Access Control > IP Based ACL. The
opens:
IP Based ACL Page
The IP Based ACL Page
•
ACL Name — Displays the user-defined IP based ACLs.
•
Rule Priority — Indicates the rule priority, which determines which rule is
matched to a packet on a first-match basis.
•
Protocol — Creates an ACE based on a specific protocol. The possible field
values are:
-
ICMP — Internet Control Message Protoco
gateway or destination host to communicate with the source host. For
example, to report a processing error.
-
IGMP Internet Group Management Protocol
—
notify their local switch or router that they want to receive transmissions
assigned to a specific multicast group.
page contains information for defining IP Based ACLs,
contains the following fields:
IP Based ACL Page
l (ICMP). The ICMP allows the
(IGMP). Allows hosts to
4
100