Defining Dhcp Snooping Properties - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring Device Security
Defining DHCP Snooping
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
•

Defining DHCP Snooping Properties

•
Defining DHCP Snooping on VLANs
•
Defining Trusted Interfaces
•
Binding Addresses to the DHCP Snooping Database
•
Defining IP Source Guard
Defining DHCP Snooping Properties
DHCP Snooping Properties Page
The
Snooping on the device.
To define the DHCP Snooping general properties:
Click Security Suite > DHCP Snooping > Properties. The
Properties Page
opens:
DHCP Snooping Properties Page
DHCP Snooping Properties Page
The
•
Enable DHCP Snooping — Indicates if DHCP Snooping is enabled on the
device. The possible field values are:
-
Checked
— Enables DHCP Snooping on the device.
contains parameters for enabling DHCP
DHCP Snooping
contains the following fields:
4
128