Modifying Multicast Forwarding - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring Multicast Forwarding
Defining Multicast Forwarding
STEP 1
STEP 2
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Click Bridging > Multicast > Forward. The
Multicast Forward Page
Multicast Forward Page
The
•
VLAN ID — Displays the VLAN ID.
•
Ports — Displays the Multicast Forwarding status of all of the specified
stacking member's ports.
•
LAGs — Displays the Multicast Forwarding status of all of the device's LAGs.
•
Interface — Indicates the port or LAG whose Multicast forwarding
configuration is described.
•
Interface Status — Displays the interface status. The options are as follows:
-
Static
— Attaches the port to the Multicast group as static member.
-
Forbidden
— Forbidden ports are not included the Multicast group, even
if IGMP snooping designated the port to join a Multicast group.
-
Excluded
— The port is not part of a Multicast group.
-
Dynamic
— Attaches the port to the Multicast group as dynamic
member.

Modifying Multicast Forwarding

Click the Edit button. The
Multicast Forward Page
contains the following fields:
Edit Multicast Forward All Page
9
opens:
opens:
245