Cisco SGE2000 - - Gigabit Switch Administration Manual page 104

48-port 10/100/1000 sfe/sge managed switches
Hide thumbs Also See for SGE2000 - Cisco - Gigabit Switch:
Table of Contents

Advertisement

Configuring Device Security
Defining Access Control
Cisco Small Business SFE/SGE Managed Switches Administration Guide
New Rule Priority — Indicates the ACE priority, which determines which ACE is
matched to a packet on a first-match basis. The possible field values are 1-
2147483647.
Source MAC Address:
-
MAC Addres
are addressed to the ACE.
-
Wildcard Mask
Wildcards are used to mask all or part of a source MAC Address.
Wildcard masks specify which octets are used and which octets are
ignored. A wildcard mask of ff:ff:ff:ff:ff:ff indicates that no octet is
important. A wildcard of 00:00:00:00:00:00 indicates that all the octets
are important. For example, if the source MAC address
09:00:07:A9:B2:EB and the wildcard mask is 00:ff:00:ff:00:ff, the 1st, 3rd,
and 5th octets of the MAC address are checked, while the 2nd, 4th, and
6th octets are ignored.
Dest. MAC Address:
-
MAC Address
packets are addressed to the ACE.
-
Wildcard Mask
mask. Wildcards are used to mask all or part of a destination MAC
Address. Wildcard masks specify which octets are used and which
octets are ignored. A wildcard mask of ff:ff:ff:ff:ff:ff indicates that no octet
is important. A wildcard of 00:00:00:00:00:00 indicates that all the octets
are important. For example, if the destination IP address
09:00:07:A9:B2:EB and the wildcard mask is 00:ff:00:ff:00:ff, the 1st, 3rd,
and 5th octets of the MAC address are checked, while the 2nd, 4th, and
6th octets are ignored.
VLAN ID — Matches the packet's VLAN ID to the ACE. The possible field values
are 1 to 4095.
Inner VLAN — Matches the ACE to the inner VLAN ID of a double tagged
packet.
802. 1 p — Displays the packet tag value.
802. 1 p Mask — Displays the wildcards bits to be applied to the CoS.
Ethertype — Displays the Ethernet type of the packet.
Action — Indicates the ACL forwarding action. The possible field values are:
s — Matches the source MAC address from which packets
— Indicates the source MAC Address wildcard mask.
— Matches the destination MAC address to which
— Indicates the destination MAC Address wildcard
4
95

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sge2000pSge2010Sfe2010Sfe2000

Table of Contents