Cisco SGE2000 - - Gigabit Switch Administration Manual page 228

Configuring IP Information
IP Addressing
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Click System > System Management > IP Addressing > ARP. The
ARP Page
ARP Page
The contains the following fields.
•
ARP Entry Age Out — Defines the amount of time (seconds) that pass between
ARP requests about an ARP table entry. After this period, the entry is deleted
from the table. The range is 1 - 40000000, where zero indicates that entries are
never cleared from the cache. The default value is 60,000 seconds.
•
Clear ARP Table Entries— Indicates the type of ARP entries that are cleared on
all devices. The possible values are:
-
All
— All ARP entries are cleared.
-
Dynamic
— Only dynamic ARP entries are cleared.
-
Static
— Only static ARP entries are cleared.
-
None
— ARP Entries are not cleared.
ARP Table
•
Interface — Indicates the interface for which the ARP parameters are defined.
•
IP Address — Indicates the station IP address, which is associated with the
MAC address.
7
ARP Page
opens:
219