Modifying Snmp Notifications Settings; Defining Snmp Filter Settings - Cisco SFE1000P Administration Manual

Modifying SNMP Notifications Settings

The Edit SNMP Notification Page allows system administrators to define notification settings. The
Edit SNMP Notification Page is divided into four areas, Notification Recipient, SNMPv1,2
Notification Recipient, SNMPv3 Notification Recipient and UDP Port Notification Recipient.
1. Click System > SNMP > Security > Trap Management > Station Management.
2. Click the Edit button. The Edit SNMP Notification Page opens:
3. Define the relevant fields.
4. Click Apply. The SNMP Notification Receivers are defined, and the device is configured.

Defining SNMP Filter Settings

The Filter Settings Page permits filtering traps based on OIDs. Each OID is linked to a device feature
or a feature aspect. The Filter Settings Page also allows network managers to filter notifications.
1. Click System > SNMP > Security > Trap Management > Filter Settings. The Filter Settings Page
opens:
Chapter 12: Configuring SNMP
Defining Trap Management
SFE1000P Gigabit Ethernet Switch Administration Guide
Edit SNMP Notification Page
Chapter
12
96