Network Interface Specification; Mechanical - Epson WF-5110 User Manual

User's Guide

Network interface specification

Wi-Fi
Ethernet
Security Protocol
*1Complies with either IEEE 802.11b/g/n or IEEE 802.11b/g depending on location of purchase.
*2Complies with WPA2 with support for WPA/WPA2 Personal.
*3You can use the product in Simple AP mode of Wi-Fi Direct even if you connect it to an Ethernet network.
*4The connected device should comply with IEEE802.3az.
*5Use a category-5e or higher cable. To prevent risk of radio frequency interference, we recommend using an STP (Shielded Twisted
Pair) cable.

Mechanical

WF-5110 Series
Dimensions
Weight
* With the output tray extension extended.
Product Information
Standard:
Security:
Frequency Band:
Communication Mode:
Standard:
Communication Mode:
IEEE802.1X
IPsec / IP Filtering
SSL / TLS
SNMPv3
Storage
Width: 461 mm (18.1 inches)
Depth: 422 mm (16.6 inches)
Height: 284mm (11.2 inches)
*
Printing
Width: 461 mm (18.1 inches)
Depth: 655 mm (25.8 inches)
Height: 383 mm (15.1 inches)
Approx. 11.3 kg (24.9 lb) without the ink cartridges and the power cord.
104
*1
IEEE 802.11b/g/n
WEP (64/128bit)
*2
WPA-PSK (AES)
WPA2-Enterprise
2.4 GHz
Infrastructure
Ad hoc
*3
Wi-Fi Direct
IEEE802.3i/u/ab, IEEE802.3az
*5
1000BASE-T /100BASE-TX/10BASE-T
HTTPS Server/Client
IPPS
*4