Honda Civic Service Manual page 1317

Front Seat Belt
Replacement
CAUTION: Check the front seat belts for damage, and
replace them it necessary. Be carolul not to damage
them during removal and installation.
Front seat belt removal (4Dl:
1 .
Slide the front seat forward fully.
Remove the center pillar lower trim panel (see page
20-59).
Remove the upper anchor cover and lower anchor
c a p .
SHOULDER
ANCHOR
UPPER ANCHOR BOLT
7/16-20 UNF
32 N.m (3.3 kgit m,
24 lbf.ft)
Apply liquid thread lock.
2.
3 .
FRONT SEAT
BELT
RETRACTOR
RETRACTOR
MOUNTING BOLT
6 x 1 . 0 m m
9 . 8 N m ( 1 . 0 k g f . m .
7.2 tbf.ftl
ER ANCHOR
Remove all the anchor bolts and the retractor bolt,
remove the retractor mounting bolt, then remove
the front seat belt and retractor.
1
I
I
LOW
CAP
7/1&20 UNF
32 N.m (3.3 kgl.m.
24 rbl.ftl
7/16-20 UNF
32 N.m {3.3 kgf.m,24lbf.ft}
6.
8 x 1.25 mm
23 N.m {2.3 kgt'm,
17 tbf.ft)
ANCHOR
ADJUSTER
7.
Installation is the reverse of the removal procedure
NOTE:
. Check that the retractor locking mechanism func-
tions as described on page 20-91.
. Make sure you assemble the washers and collars
on the uDDer and lower anchor bolts as shown.
.
Before installing the anchor bolts, make sure there
are no twists or kinks in the front seat belt.
Upper anchor boh construciion:
UPPER ANCHOR
BOLT
Remove the center pillar upper trim (see page 20-59)
Remove the shoulder anchor adjuster.
UPPER
COLLAR
Apply liquid thread
(cont'd)
20-85
SUSHING