Honda Civic Service Manual page 1051

Driveshafts
Reassembly lcont'd)
Installthe outboard boot and the boot bands.
. lf the boot is the rubber type. go to step 13.
. lf the boot is the TPE type, go to step 9.
Fit the boot ends onto the driveshaft and outboard
ioint.
10, Set the ear clamp band by threading the tab into the
holes of the band.
EAR CLAMP BAND
Reolace.
8 .
1 6 - 1 6
11. Close the ear portion of the band with a commer-
cially available boot band Dincerc.
BOOT BAND PINCERS
KENT-MOORE J,35910
or eouivalent
Chsck the clearanca between the closed ear oonion
of the band. lf the clesrance is not within the stan-
dard, close the ear portion of ths band further.
6.0 mm (0.24 in) MAX
3.0 mm 10.t2 inl MAX
EAR FOFNON