Honda Civic Service Manual page 1700

Power Windows
Master Switch Input Test {Coupe/Hatchback)
NOTE: The control unit is built into the power window master switch, and only controls driver's door window operatlons.
l
Remove the driver's door panel, and disconnect the 12P connector from the master switch.
2. Inspect the connector and socket terminals to be sure they are all making good contact.
. lf the terminals are bent, loose or corroded, repairthem as necessary, and recheck the system.
. lf the terminals look OK, make the following input tests at the connector.
-
lf a test indicates a problem, find and correct the cause. then recheck the system.
-
lf all the input tests prove OK, the power window master switch must be faulty; replace it.
23-228
Ware side of female terminals