Honda Civic Service Manual page 1031

Shift Cable
RemovaUlnstallation
@
Make sure lifts, iacks and safety stands are
placed properly (see seqtion 11,
1. Remove the front console (see section 20).
2. Shift to E position, then remove the lock pin from
the adiuster.
ADJUSTER
14-354
Remove the air cleaner housing assembly.
Remove the clip from the control lever, and loosen
the locknut.
CLIP
SHTFT CABLE LOCKNUT
29 N.m 13.0 kgf m,22 lbf.ft)
SHIFT CABI-E
BRACKET
7 .
8 .
CONTROL LEVER
Remove the shift cable from the control lever, the
shift cable bracket, and the clamp.
Remove the shift cable bracket bolts and nuts, then
remove the shift cable. Take care not to bend the
shift cable when removing/installing it.
SHIFT CABLE BRACKET
lnstall the shift cable in the reverse order of removal.
Check the cable adjustment (see page 14-355).
\ .
*o"ra" \
{1.2 kgI m, 8.7 lblft)