Honda Civic Service Manual page 1705

Driver's Window Motor Test
Motor Test:
l.
Remove the driver's door panel (see section 20).
Terminal side of male terminals
Disconnect the 4P connector from the motor.
Test the motor in each direction by connecting bat-
tery power and ground according to the table.
CAUTION: When th€ molor stops running, discon-
n€ct one lead immediat€ly.
4. lf the motor does not run or fails to run smoothlv.
reDlace it.
3 .
l . , ,
\
Terminal
;."t1."
-_l\
1
UP
o
@
DOWN
o
o
Puls€r Test:
5.
Connect the test leads of an analog ohmmeter to the
No. 3 and No. 4 terminals.
6.
Run the motor by connecting power and ground to
the No. 1 and No.2 terminals. The ohmmeter needle
should move back and forth alternately.
23-233