Sew Setting Stage; Region Sewing - Brother PE-Design Next Instruction Manual

Sew Setting Stage

In the Figure Handle Stage, click 1.
b
Memo:
In the Sew Setting Stage, the colors of the
Design Page and background can be
changed from the Design Setting dialog box
(displayed by clicking 1, then 2).
Setting region/line sewing
■

Region sewing

1.
Click 1, then 2.
1
2
2.
If necessary, change the color and sew type.
c
"Sewing attributes" on page 204
3.
Click the enclosed region to apply the sewing
attributes.
1
Marching lines
a
Note:
1
• If the attributes cannot be applied to a
region, go back to the Figure Handle
2
Stage and make sure that region is
closed.
• Edit any broken lines with the Edit Point
tool.
Sew Setting Stage
203