Brother PE-Design Next Instruction Manual page 187

Step 1 Original Image Stage
■
Extract outlines from an image
1
Click (Start), and then select All
Programs, then PE-DESIGN NEXT, then
Tools, then Design Center.
2
Click 1.
1
3
Click 1.
1
Basic Design Center Operations
4
Select the desired image file, and then click
Open.
a
Note:
Airplane image is located at:
C:\My Documents\PE-DESIGN NEXT
\Sample\Design Center.
5
In 1, select the colors to be used for the
outlines (embroidery lines).
 The selected color appears in a box on
the right side, and
check box to show that the color is
selected.
1
The desired color can be selected
more easily if the Zoom slider is
used to enlarge the image.
If a color other than that for the
outline was selected, clear the
check box beside the color to
deselect it.
appears in the
185