Image To Stitch Wizard; Advanced Stitch Wizard Operations; Select Mask Dialog Box - Brother PE-Design Next Instruction Manual

Advanced Stitch Wizard Operations

Advanced Stitch Wizard Operations

Image To Stitch Wizard

Clicking displays the following dialog box. If
an image has been imported, the next dialog box
appears.
(1)
(2)
(1) Sample image before being converted
(2) Sample image of embroidery pattern after
being converted
(3) Select the conversion method.
(4) Select to start up Design Center and
import the image into the Design Page.
(5) Description of conversion method
(6) Click to continue to the next step.
134
b
If no image has been imported into the Design
Page, the Open an image file dialog box
appears.
(3)
Adjusting the Mask and
Image
■

Select Mask dialog box

(4)
The Select Mask dialog box appears no matter
which conversion method was selected.
(5)
(2)
(6)
(3)
(1) Drag the handles to adjust the shape of
Memo:
(1)
the mask. Drag the mask to adjust its
position.
a
Note:
With a small original image, it may not be
possible to reduce the size of the mask.
(4)
(5)