Brother PE-Design Next Instruction Manual page 30

Tutorial 1: Getting Started
3
Move the pointer over the butterfly, and then,
while holding down the left mouse button, drag
the mouse to import the pattern into the
Design Page, as shown in the illustration.
c
"Importing embroidery designs" on
page 78
4
Click in the Import dialog box to close it.
5
Move the pointer over the rotation handle (1),
and then, while holding down the left mouse
button, drag the mouse to adjust the angle of
the pattern.
a
Note:
When imported stitch patterns are enlarged
or reduced, the embroidering quality may be
reduced.
c
"Enlarging/Reducing Stitch
Patterns" on page 268.
28
Step 7
You can sew a pattern transferred to your sewing
machine by writing it to media.
There are many methods to transfer data; however,
the procedures for two of these methods are
described below.
• Writing to an original card (☞p. 28)
Data can be transferred to embroidery machines
compatible with original cards.
• Transferring data to embroidery machines via a
USB media (☞p. 29)
Data can be transferred to embroidery machines
equipped with a USB-B connector.
b
• You can also use a floppy disk, Compact
1
• The Link function can be used to transfer
■
Transferring the design to an
original card
1
Insert an original card into the USB card writer
module.
Transferring embroidery patterns
to embroidery machines
Memo:
Flash card and USB media to transfer
designs that can be used with your
machine.
c
"Transferring to a machine by
using USB media" on page 175
embroidery data to compatible embroidery
machines.
c
"Using the Link Function to
Embroider From the Computer"
on page 177