Brother PE-Design Next Instruction Manual page 210

Sew Setting Stage
Preventing overlapping stitching
of regions (hole sewing)
By specifying hole sewing, the stitching in
overlapping regions will not be sewn twice. Hole
sewing can be set only when one region completely
encloses another.
1.
Click 1, then 2.
1
2
2.
Click the region that completely encloses
another region.
3.
Click OK to set hole sewing.
208
b
Memo:
To cancel hole sewing, click the white inner
region. The inner region will be sewn twice
when it appears in the same color as the outer
region.
Applying stamps
Stamps can be applied to regions in the Sew Setting
Stage of Design Center.
Click 1, then 2, click 3.
1
2
3
: Click this button to apply a stamp.
: Click this button to edit the applied stamp.
Settings for stamps are specified in the same way
that they are in Layout & Editing.
c
"Applying and editing stamps" on page 60
b
Memo:
Some stamp patterns are provided with this
application; however, by using Programmable
Stitch Creator, you can edit the patterns that
are provided or you can create your own.