Brother PE-Design Next Instruction Manual page 306

Sewing attributes
Programmable fill
1
2
Maintain aspect ratio
Direction
row
Offset
column
Base Sewing
Stitch Type
Step Pitch
Frequency
Pattern
Area where the embossing
or engraving effects are
applied
304
Click to display the Browse dialog box. Select a folder, and then select the desired
pattern (.pas file) from the list of patterns that appears.
Specify the pattern size. The pattern can
be enlarged or reduced while maintaining
the width-to-height proportion.
1 Height
Specify the pattern
(vertical
height.
length)
2 Width
Specify the pattern
(horizontal
width.
length)
When selected, the height-to-width proportions of the pattern are maintained.
0%
Row 50%
To specify base stitching, select the check box, and then specify settings for the following
attributes.
Specify the shape of the returning ends
of the stitching.
This cannot be specified if the sewing
direction is set to variable.
Specify the length of one stitch.
0%
Smaller
Short
Short
90°
45°
135°
180°
0°
225° 315°
270°
Column 50%
Short
50%
This area is sewn with the stitching settings
specified for the base sewing of the
programmable fill stitch.
This area is sewn with the stitching settings
specified by the pattern file.
Larger
Tall
Long
Long