Brother PE-Design Next Instruction Manual page 304

Sewing attributes
To specify half stitching, select the check box.
Half Stitch This cannot be specified if the sewing direction is set to
Constant.
The inside of region setting is not available if the
Gradation check box is selected.
Running
This cannot be specified under the following conditions.
Stitch Path
• The sewing direction is set to Variable.
• Text and manual punching patterns
Pull
Lengthen the sewing region in the sewing direction to
compensa-
adjust for pattern shrinkage during sewing.
tion
This sewing attribute is available only when a text pattern is selected.
Connection
c
"Selecting connection point positions in a text pattern" on page 100
Points
b
Memo:
"Manually Creating Professional-Level Embroidery Patterns (Manual Punching)" on page 148
302
Off On
The inside stitching is
The stitching is adjusted
to a more even density.
dense.
Inside of region
Along outline
On outline
No compensation Longest
compensation