Brother PE-Design Next Instruction Manual page 102

Advanced Operations for Entering Text
Selecting connection point
positions in a text pattern
The positions for connection points between
characters within the same text (end point of one
character and the start point of the next character)
can be specified.
The available settings are Default, Closest and
Farther.
1.
Select the text or monogram text.
If the Sewing Attributes tab is not displayed,
click View tab in the Ribbon, then Sewing
Attributes.
2.
Click a setting under Connection Points.
(1)
(1) Default
Stitches are created in the default sewing
order for good stitching quality of all
characters.
(2) Closest
Stitches are created at the shortest distance
between the end point of one character and
the start point of the next character. This
shortens jump stitches and reduces the
number of times that the thread is trimmed.
100
(2) (3)
The Sew group in the Attributes tab allows you to set
the embroidery attributes (thread color and sew
type, outline and inside region on/off).
When text is selected, settings can be specified for
the following.
(3) Farther
Stitches are created at a farther distance
between the end point of one character and
the start point of the next character. This
lengthens jump stitches so they can easily be
trimmed manually.
A Connection Point setting can be selected
not only for region sewing, but also for line
sewing.
a
Note:
• These settings are not available with text
created using built-in fonts 025 or 029, a
TrueType font, a custom font or a Small
Text font.
• These settings are not available for text
containing characters of different colors.
• These settings are not available for text
where the sewing order of the characters
is not continuous.
Embroidery attributes for
text