Brother PE-Design Next Instruction Manual page 188

Basic Design Center Operations
6
After selecting the colors to be used for the
outlines, click OK.
 The line image appears in the Design
Page.
Step 2 Line Image Stage
■
Using the Eraser
1
To erase a line, select the Eraser Tools. Click
1, then 2.
1
2
Select an Eraser tool according to the size of
the area or thickness of the line to be erased.
2
Move the pointer over the line to be erased,
and then click the line or drag the pointer to
erase the line.
186
■
Using the Pen
1
To draw lines, select the Pen Tools. Click 1,
then 2.
1
2
Select the Pen tool with the desired thickness
of the line to be drawn.
2
Drag the pointer to draw a line. To add a point,
click in the Design Page.
b
Memo:
To draw vertical or horizontal lines, hold down
the Shift key while moving the pointer.
b
Memo:
• If lines are drawn or erased incorrectly, click
(Undo button) (1) to undo the last
operation.
• To change the display size, use Zoom
command (2).
• The part of the work area that is displayed
can easily be changed by using the Pan tool
(3).
1
2
3