Brother PE-Design Next Instruction Manual page 299

Motif stitch
Select a pattern for the motif stitch.
Click
file) from the list of patterns that appears.
Specify the pattern size. The pattern can be
enlarged or reduced while maintaining the width-to-
height proportion.
1 1 Height
(vertical
length)
2
2 Width
(horizontal
length)
Maintain aspect
When selected, the height-to-width proportions of the pattern are maintained.
ratio
Specify the arrangement of the patterns along a
H-Arrange
horizontal axis.
(horizontal
All patterns or each pattern can be flipped along the
arrangement)
horizontal axis.
Specify the arrangement of the patterns along a
V-Arrange
vertical axis.
(vertical
All patterns or each pattern can be flipped along the
arrangement)
vertical axis.
Offset 0.0 mm
Narrow
Spacing
Run pitch Specify the length of one stitch.
This sewing attribute is available only when a text pattern is selected.
Connection
c
Points
Feed
Start/End Type
c
to display the Browse dialog box. Select a folder, and then select the desired pattern (.pmf
Specify the pattern height.
Specify the pattern width.
"Selecting connection point positions in a text pattern" on page 100
"If the entry/exit points of sewing have been changed" on page 300
Sewing attributes
Smaller Larger
Short Tall
Short Long
Normal
Mirror
Alternate
Normal
Mirror
Alternate
Offset: 4.5mm
Wide
Short Long
Run
297