Brother PE-Design Next Instruction Manual page 38

Tutorial 2: Drawing shapes to create an embroidery design
3
Select the patterns where hole sewing is to be
applied.
(A) While holding down the
the yellow circle (1) and the flower petals
(2).
4
Specify hole sewing.
(A) Click 1, then 2, then 3.
1
2
3
a
Note:
Hole sewing cannot be applied if one of the
patterns is not completely enclosed within
the other pattern.
c
"Hole sewing" on page 45.
36
Step 4
Ctrl key, click
Detailed line and region attribute settings can be
specified from the Sewing Attributes tab. Now, we
will specify settings for region sewing for the
flowerpot.
1
2
1
4
5
Applying a pattern to
stitching
Specify the color and sew type for the line and
region of the flowerpot.
(A) Click 1, then 2, then 3.
1
2
3
(B) Select CLAY BROWN in the color palette
as the line color and Zigzag Stitch as the
sew type (4).
(C) Select DEEP GOLD in the color palette as
the region color and Prog. Fill Stitch as
the sew type (5).