Brother PE-Design Next Instruction Manual page 178

Transferring Embroidery Designs to Machines
Transferring directly to a
machine's memory
Designs can be transferred to
embroidery machines that can
be connected to a computer
using a USB cable.
1.
Connect the embroidery machine to the
computer.
2.
Click 1, then 2, then 3, then 4.
1
3
 Data transfer begins.
a
Note:
If there is already a file with the same name
at the destination, the following dialog box
appears. Select whether to overwrite the
existing file, to stop copying or to copy the
file using a different name.
176
3.
After the data has been transferred, the
message "Finished outputting data." appears,
indicating that the transfer is finished. Click
OK.
b
Memo:
• For details on transferring designs with this
method, refer to the Operation Manual
provided with your embroidery machine.
• If multiple machines are connected, specify
where the data is to be transferred in the
area shown below.
2
• If the connected embroidery machine has
been set to Link mode, the command Send
4
to Your Machine, mentioned in this
procedure, cannot be selected. To select
this command, return the machine to
normal mode.