Specifying The Sewing Area - Brother PE-Design Next Instruction Manual

Specifying the Design Page Size and Color
Specifying a user hoop size
(4)
(1)
(1) Width, Height:
Type in the size of the hoop to be added.
(2) Comment:
If text was entered in this box, that text
appears beside the size.
(3) Add Hoop:
Click this button to add the hoop size.
(4) User Hoop List:
The added hoop size appears in the list.
Select a hoop size in this list to change the
display order or to delete it.
(5) Up, Down:
Click these buttons to move the selected
hoop size up or down in the display order.
(6) Delete Hoop:
Click this button to delete the selected
hoop size.
a
Note:
• A User Hoop cannot rotate 90°.
• A User Hoop cannot be added to the
Section Size (for Hoop Size) selector
under Custom Size.
• Do not create a Custom Hoop larger than
the embroidery hoop that can be used with
your machine.
• Embroidery data created in a User Hoop
cannot be saved in a format for a previous
version.
86

Specifying the sewing area

The sewing area can be specified.
Click 1.
(5)
1
(6)
(3)
(2)
Select the desired sewing area (Design Page area
or Use existing design area).
Design Page area: The patterns will be sewn
so that the needle position when you start
sewing is aligned with the center of your
Design Page.
b
Memo:
When Design Page area is selected, the
dimension of the pattern matches the size of
the Design Page, therefore reducing the
ability to move a pattern around the layout
screen of your embroidering machine.
Use existing design area: The patterns will
be sewn so that the needle position when you
start sewing is aligned with the center of the
actual patterns.
b
Memo:
When Use existing design area is selected,
the actual pattern size is maintained, therefore
allowing greater mobility when using the layout
functions of your embroidering machine.