Brother PE-Design Next Instruction Manual page 45

3.
Continue clicking to specify every point, and
then double-click the last point, or press the
key.
Enter
b
Memo:
• You can freely switch between the different
line types either by clicking a different
button or by pressing the shortcut key.
• When drawing a straight line, hold down the
Shift key while moving the pointer to draw
vertically or horizontally.
• Even after the pattern is drawn, you can
change the attributes of line ends.
c
"Changing the attributes of line
ends" on page 43.
• Even after the pattern is drawn, you can
transform straight lines into curves and vice
versa.
c
"Transforming straight lines into
curves or curves into straight
lines" on page 63.
■
Freehand lines
1.
Drag the pointer to draw the line.
2.
Release the mouse button to finish drawing.
Changing the attributes of
line ends
1.
Select an object drawn with a Line/Region
tool. Then, click the Attributes tab.
2.
From the Path shape selector, select Open or
Close for the line ending.
Embroidery attributes of
shapes
The Attributes tab allows you to set the embroidery
attributes (thread color and sew type, outline and
inside region on/off).
Example 1: When a rectangle is selected.
Drawing Shapes
43