Creating Fill/Stamp Stitch Pattern - Brother PE-Design Next Instruction Manual

Creating Fill/Stamp Stitch Pattern

Existing programmable stitch patterns can be edited to create new patterns.
Step 1 Opening a fill/stamp stitch pattern
Step 2 Drawing lines to edit the fill/stamp stitch pattern
Step 3 Applying embossing/engraving effects to the fill/stamp stitch pattern
Step 4 Saving the edited fill/stamp stitch pattern
Step 5 Using the edited fill/stamp stitch patterns in Layout & Editing
Step 1 Opening a fill/stamp stitch
pattern
First, we will open a fill/stamp stitch pattern to be
edited. In this example, we will use pattern
wave1.pas.
1
Click (Start), then select All Programs,
then PE-DESIGN NEXT, then Tools, then
Programmable Stitch Creator.
2
Click 1, then 2.
1
2
3
Select Fill/Stamp File(*.PAS) in the Files of
type selector.
Select the pattern file wave1.pas.
Creating Fill/Stamp Stitch Pattern
The pattern file can be found at the following
location.
For example, (Drive where PE-DESIGN was
installed)\Program Files (Program Files
(x86))\Brother\PE-DESIGN NEXT\Pattern.
b
Memo:
To view the data in the selected folder as
thumbnails in the Browse dialog box, click
Browse.
Step 2 Drawing lines to edit the fill/
stamp stitch pattern
1
Click 1, then 2.
1
2
231