Photo Stitch 2 Features - Brother PE-Design Next Instruction Manual

Photo Stitch 2 Features

Photo Stitch 2 Parameters
dialog box
With Color:
(1) (1) (2)
(3)
With Mono:
(1) (2)
(3)
Specify the desired settings under Sewing Option
(1) and Color Option (2), and then click Update
Preview (3) to preview the effects of the specified
settings. Click Finish (4) to convert the image to an
embroidery pattern.
(1) Sewing Option
Line interval
Lower value
Max. Density
0°
Direction
Add mask If this check box is selected, line data is
outline created from the mask outline.
(4)
(4)
Line interval
Higher value
45° 45° 90°
Photo Stitch 2 Features
(2) Color Option
Color
You can select the brand of thread to
Thread Chart
use with the Color Set function.
If Auto Select is selected, the most
appropriate four colors will automatically
be selected.
Selecting a different option specifies the
four colors used when creating the
embroidery pattern.
The color choices are: cyan (C),
Color Set
magenta (M), yellow (Y), black (K), red
(R), green (G) and blue (B). Select one
of the following combinations that
contains the colors most used in the
image.
Color combinations: CMYK, RGBK,
CRYK, BMYK
Thread
Displays the four selected thread colors.
Colors Used
Under Thread Colors Used, click a
color. Then, click Change Color to
Change display the Thread Color dialog box.
Color Select the new color and click OK. The
selected thread color will be applied to
the image shown in the preview box.
Mono
Click on the Change Color button to
open the Thread Color dialog box if you
Change
wish to change the color of the photo
Color
stitching. Select the color and click OK
to make the color change.
Color/Mono
The top slider is used to adjust the
Brightness / brightness.
Contrast The bottom slider is used to adjust the
contrast.
Update Updates the previewed image after
Preview settings have been changed.
129