Changing The Settings; Changing The Drawing Mode - Brother PE-Design Next Instruction Manual

Changing the Settings

Changing the Settings
Changing the drawing
mode
There are two drawing modes in Font Creator.
• Fill mode
Blocks appear filled in. In this mode, the
overlapping positions of patterns can be viewed
better.
• Outline mode (Fill mode Off)
Blocks do not appear filled in. In this mode,
points can be edited more easily.
Perform the operation described below to switch
between these modes.
Click 1, then 2.
1
2
264
Changing the density
background image
■
Changing the density of the
background image
Click 1, and then drag the slider (2), or click
1
2
Hide (off) 50%
25% 75%
b
Memo:
• This function is not available if no template
image has been imported into the work area.
• Press the shortcut key (
between displaying the image (On (100%))
to displaying it faded at each density (75%,
50% and 25%) to hiding the image (Off).
■
Scaling/Moving the background
image
Click 1, then 2.
1
2
 The background image is selected.
The background image can be moved or
resized in the same way that font character
patterns are edited.
c
"Editing Font Character Patterns" on
page 259.
b
Memo:
The background image cannot be scaled or
moved if a TrueType font is used as the
template.
or .
100%
) to switch
F6