Brother PE-Design Next Instruction Manual page 42

Drawing Shapes
b
Memo:
Rectangles with rounded corners
To change the radius of the corners, click the
Edge radius selector, located in the Outline
Attributes tab. Then type the desired radius
and press the
Enter
desired value.
Example 1
Edge radius: 0.0 mm
■
/ /
: Arc
: Arc & String
: Fan
1.
Proceed as you would to draw a circle or an
oval.
 A radial line appears on the oval when the
mouse button is released.
2.
Move the pointer to the start point of the arc,
and then click.
 The radial line disappears.
40
key, or select the
Example 2
Edge radius: 20.0 mm
3.
Move the pointer until the arc/arc & string/fan
has the desired shape, and then click.
b
Memo:
Dragging the pointer while holding down the
key moves it in 15° increments. The
Shift
current angle is shown in the status bar.
Arc
Click at start point.
Move to end point.
Arc & String
Click at start point.
Move to end point.
Click at end point.
Click at end point.