Brother PE-Design Next Instruction Manual page 114

Name Drop Feature (Replacing Text)
(3) Edit Text
Enters input mode for the text in the
selected cell. (Input mode can also be
entered by double-clicking a cell.)
(4) Select a row, and then click Insert. A new
row is inserted above the selected one.
(5) Select a row, and then click Delete. The
selected row is deleted.
b
Memo:
If the pattern contains two text patterns with
the Name Drop attribute applied, the text list
appears as shown below.
■
Saving / importing a text list (CSV)
(6) Saves the created Name Drop List.
Click this button, select the drive and
folder, type the name of the file in the File
name box, and then click Save to save
the list as a .csv file.
(7) Imports a Name Drop List as a .csv file.
Click this button, select the drive and
folder, click the name of the file, and then
click Open, or double-click the file's icon.
■
Outputting patterns using text
from the text list
(8) Click to send to machines by using the
Link function. This button is available if an
embroidery machine compatible with the
Link function is connected to the
computer. Connect a compatible
embroidery machine that has been
started in Link mode.
c
"Using the Link Function to Embroider
From the Computer" on page 177
(9) To Folder
c
"Outputting patterns using text from the
text list" on page 108
112
■
Editing a pattern with text
replaced
(10) Select text in the Name Drop List dialog
box and click OK to return to the Design
Page and edit the pattern with the text
replaced.
b
Memo:
Select a text pattern with the Name Drop
attribute applied, and then click 1, then 2, then
3 to display the Name Drop List dialog box for
the selected text.
1
2
3