Checking Embroidery Design Information - Brother PE-Design Next Instruction Manual

Checking Embroidery Patterns
b
Memo:
The default setting can be specified for
whether or not thread trimming is applied to
objects that are created.
Click Option above the Ribbon, and then click
Options to display the Options dialog box.
Next, click Jump Stitch Trimming, and then
select or clear the Add jump stitch trimming
to the entered patterns. check box.
c
"Adding jump stitch trimming to
new patterns" on page 275
Checking embroidery
design information
Click 1.
You can enter comments and information about the
pattern to a saved .pes file.
76
1
b
Memo:
• You can select and check the properties of
individual patterns within the embroidery
design by selecting the pattern before
opening this dialog box. In this case,
clearing the Show about selected
Object(s) check box switches the dialog
box to display properties for all patterns in
the Design Page.
• To display the colors as the machine's
preset color names, select the with Basic
Color check box.
• If the Design Page was set to Custom Size
or Hoop Size was set to a multi-position
hoop (100 x 172 mm or 130 x 300 mm) or
the jumbo frame (360 x 360 mm), a Design
Property dialog box appears with the
sewing information for each hoop of the
pattern in the Design Page.
• Files can be searched for in Design
Database according to the entered
information.