Step 4; Step 4 Automatically Correcting The Image And Creating An Embroidery Pattern - Brother PE-Design Next Instruction Manual

2
Click Fit to page (1) to change the final
finishing size.
1
Embroidery pattern size
b
Memo:
• The size of the embroidery pattern appears
in the lower left corner of the dialog box. The
user can change the size freely with this
display.
• For best results, change the size of the
embroidery pattern to the sizes listed below.
• Face only: 100 × 100 mm
• Head and shoulders: 130 × 180 mm
c
"Check Mask Shape/Modify Image dialog
box" on page 135 and "Gray Balance /
Modify Image dialog box" on page 136
3
Check the preview of the area to be converted
then click Next.
Tutorial 6-2: Photo Stitch 1

Step 4

Automatically correcting
the image and creating an
embroidery pattern
1
Click Select from Candidates (1).
(1)
 There are six patterns with different
brightness and contrasts based on the
original image.
2
Select one of the candidates (1) and click OK
(2).
(1)
(2)
 This preview changes to the selected
image.
123